Skid Mounted Ozone Water Treatment System

Spartan Environmental Technologies provides skid mounted ozone water treatment injection systems including standard (SPARTOX) and custom designed units. The figure below shows a simple system design employing a venturi injector with booster pump. The ozone generator is supplied oxygen from a PSA type oxygen concentrator. A needle valve allows back pressure to be applied against the ozone generator. Most ozone generators require back pressure of 5-20 psi. The design also include a back flow prevention system. In this case, a liquid tap and check valve. The venturi injector is driven by a booster pump. The design provides for measurement of the flow to the injector as well and inlet and outlet pressure. All three parameters are important for determining the gas flow through the injector.

The photos below show the front and side view of a 3 lb/day (57 g/hr) ozone injection skid that employs the design shown above.

The photos below show details of the controls and gauges for the skid mounted ozone water treatment system. Along with the photos is a drawing of the system. It uses one of the AE series ozone generators and a Topaz+ oxygen concentrator/compressor package. The skid has a foot print of 36″ x 28″ and a height of 50″.