DESOZONE Specs for Municipal and Industrial Customers

DESOZONE Skid Mounted System

To download a PDF Version of this Data in English Units Click Here

Process Description

Air containing odors to be removed is drawn from an area or a process and washed with basic ozonated water recycled by the pump. Sodium hydroxide is added to the recirculated water by a dosing pump equipped with a pH controller.

DESOZONE System Components

Ozone generator
Air compressor with pre-filter and cooler (customer supplied)
Air filter
Air drier
Cooling water and drain (customer supplied)
Ozone mixing device
Ozone destroyer
Washing system
Contact chamber with packing
Sodium hydroxide addition pump
Sodium hydroxide storage tank
pH control
Blower
Recycle pump

Air to Treat (m3/h)	250	500	1,000	2,500
Air to Treat (SCFM)	156	313	625	1563
O3 Required (g/h)	2	4	8	20
O3 Generator Power (KW)	0.03	0.06	0.12	0.25
Total Power (KW)	0.9	1.2	2.8	3.6
Compressed Air (m3/h)	0.5	1	2	5
Blower power (KW)	0.5	0.75	1.5	2.2
Recycle Pump Flow (m3/h)	1	1	2	5
Recycle Pump Power(KW)	0.3	0.3	1.1	1.1
Coolant Water flow (l/h)	5	10	20	40
Dried Air (m3/h)	0.1	0.1	0.5	1.0
Dimensions W x L x H (m)	1.4 x 2.1 x 2.2	1.4 x 2.1 x 2.2	1.6 x 2.1 x 2.2	1.6 x 2.1 x 2.2

Air to Treat (m3/h)	5,000	10,000	15,000	20,000
Air to Treat (SCFM)	3,125	6,250	9,375	12,480
O3 Required (g/h)	40	80	120	160
O3 Generator Power (KW)	0.6	1.2	1.8	2.4
Total Power (KW)	5.5	8.3	12.2	15.7
Compressed Air (m3/h)	5	10	15	20
Blower power (KW)	2.2	3.3	5.5	7.3
Recycle Pump Flow (m3/h)	10	20	30	40
Recycle Pump Power(KW)	2.2	3.3	4.4	5.5
Coolant Water flow (l/h)	80	160	240	320
Dried Air (m3/h)	2	4	6	8
Dimensions W x L x H (m)	2 x 5.5 x 2.2	2 x 5.5 x 2.2	2.3 x 5.5 x 2.2	2.3 x 5.5 x 2.2

Specifications

Ozone Generator

Dosage	8 mg/m3 of air
Design temperature	30 degrees C
Operating frequency	820 Hz
Operating voltage, max	3-9 kV

Cooling water

Temperature in/out	15/20 degrees C
Operating pressure	1 bar

Compressor ( EXCLUDED FROM OUR SUPPLY)

Type

Oil Free

Air Filters

Coalescent and Carbon

Electrical

380 V, 3 Phase, 60 Hz.

Air Drier

Type	microporous
Design pressure	10 bar
Actual Pressure	7 bar
Design temperature	30 degrees C
Dew point (at 1 bar)	-60 degrees C

Sodium Hydroxide

NaOH concentration	40%
Dosing pump capacity	0.2 to 2 L/hr Type 200 to 2500 0.4 to 4 L/hr Type 5000 to 20000
Storage tank	50 L Type 200 to 2500 100 L Type 5000 to 20000

Ozone Mixer and Residual Ozone Destroyer

Power required

100 W Type 200 to 2500 500 W Type 5000 to 20000

Scrubber

Type	Horizontal
Material	PP
Packing	Pall/Raschig
Head loss	100 mm.w.c.
WxLxH	0.5 x 1.4 x 1.6 to 0.8 x 1.6 x 1.6m Type 200 to 2500
WxLxH	1.3 x 4.5 x 2.2 to 1.7 x 4.5 x 2.2m Type 5000 to 20000

Complete with internal drop separator, service piping, valves, bottom tank, drainage, man-hole, level switches.

Blower

Head	170 mm.w.c.
Material	PP
RPM	2850
Noise	85 dB at 2 m
Protection	IP 55
Transmission	Direct

Recycle Pump

Head	10 m.w.c.
Material	PP
Protection	IP 55
RPM	2900

Complete with valves, filter and service piping, manometer.

Ambient Conditions

Pressure	1000 m bar
Temperature	<35 degrees C
Relative Humidity	<80%